Sodalite & Mother Of Pearl Necklace
This necklace design combines sodalite and mother of pearl for a unique look can be customised with your favourite half drilled beads.
All you need to make these earrings is half drilled beads, sterling silver pendant setting and some 'Devcon 5 Minute Epoxy' glue which is the glue that we recommend.
Are you thinking of making these as a gift? Why not add a presentation box or gift bag to your order.
STEP BY STEP INSTRUCTIONS
1. Firstly, check that the pegs on the pendant setting is not too long, the beads should be flat on the settings when you push them into the pegs. If necessary you can simply use a pair of snips to trim the peg slightly.
2. Apply glue to the pegs, set the beads and leave to dry.
3. Use snipe or flat nose pliers to twist open a jump ring and attach to the loop of the pendant and twist closed.
4. Attach the chain and your design is complete!
SUGGESTED TOOLS FOR THIS PROJECT
Devcon 5 Minute Epoxy Glue - For super-fast, high strength, high-quality bonds
Snipe nose pliers or flat nose pliers - for opening and closing jump rings
Snips (also known as straight metal shears) are ideal for cutting sheet metal and wire so an indispensable tool in your kit
CUSTOMISE YOUR KIT
Make the design your own by using
HELPFUL PAGES
How to open and close a jump ring
Kernowcraft's jewellery making kits are aimed to inspire you - therefore the step by step instructions are available online only with a shopping list, where you can easily customise the design to suit you. We recommend printing or bookmarking this page ready to follow.
The suggested products used in this project are suggestions to inspire you. Products used were compatible at the time of making but do be aware that gemstones are natural and hand cut stocks can vary, so do use your own common sense as to the compatibility of each item when making.
Your Shopping List
There are one or more items out of stock at present.
