Stone Setting Burr
![c129-stone-setting-burr.jpg](https://img.kernowcraft.com/cdn-cgi/image/w=1362,q=90,f=auto/original/15a8b556/33982.jpg)
![img_0002_2.jpg](https://img.kernowcraft.com/cdn-cgi/image/w=1362,q=90,f=auto/original/d778d4a8/33985.jpg)
![c129-stone-setting-burr-close.jpg](https://img.kernowcraft.com/cdn-cgi/image/w=1362,q=90,f=auto/original/235ee033/33984.jpg)
![c129-stone-setting-burr-sizes.jpg](https://img.kernowcraft.com/cdn-cgi/image/w=1362,q=90,f=auto/original/bbe4cd63/33983.jpg)
Stone Setting Burr
This stone setting burr is ideal for adjusting setting depths, enlarging and putting a bevel on holes as well as adding pattern and texture to metals and much more!
These high quality steel burrs have a 2.3mm shank for use in most pendant or hobby drills such as our Dremel Multi Tool (to use this size of shank with our Dremel you will need a multi chuck). When used at speed, the cutting 'teeth' on this burr will cut a cone shaped recess into your metal which can be a useful shape in which to fit the back of a faceted stone. If required, the cone shape can be sunk into a cylindrical hole by allowing the burr to cut deeper. They can also be used by hand with a pin vice to gently pare away excess metal.
- Available in a choice of diameters
- Shank size: 2.3mm
- Sold individually