Mystic Pink Crystal Necklace

Mystic Pink Crystal Necklace

We have used our mystic pink quartz drilled points to make this beautiful boho necklace.

Step by step instructions

Start by deciding the length of the necklace that you want. We have chosen a 55cm chain but you can choose smaller if you wish.  

First, wire wrap one of the crystals using the method shown here. When you have finished step 5 from the method shown in the link, continue to wrap down the crystal on one side and thread through the hole. At the end of the hole, wrap the wire around the circumference a few times and then through the hole again and back up the other side to the top. Secure with a few wraps at the top.

Wrap the 2nd crystal with the same method.

Next, take the 10cm piece of chain and connect a small jump ring to the end. With the jump ring still open, thread the crystal loop onto it and close tight. Repeat at the other end of the chain.

Open the large jump ring and insert the main chain. With the jump ring still open thread on the small chain approximately 3cm along the length. Close the jump ring.

Your necklace is now complete!

Suggested tools for this project

Side cutters - for cutting metal wire, headpins etc. with minimum effort

Round nose pliers - for bending loops in wire

Snipe nose pliers or flat nose pliers - for opening and closing jump rings

Or pack of pliers & side cutters which is an economical way of buying all the pliers you will need for every project!

Customise Your Kit

Shop chain

Shop crystals

Helpful Pages

How to wire wrap a bead

Jewellery Making Books

'The Basics of Bead Stringing' by Debbie Kanan

'Beading Design' by Kim Glover

'The Encyclopedia of Wire Jewellery Techniques' by Sara Withers


Kernowcraft's jewellery making kits are aimed to inspire you - therefore the step by step instructions are available online only with a shopping list, where you can easily customise the design to suit you. We recommend printing or bookmarking this page ready to follow.

The suggested products used in this project are suggestions to inspire you. Products used were compatible at the time of making but do be aware that gemstones are natural and hand cut stocks can vary, so do use your own common sense as to the compatibility of each item when making.


What Our Customers Say...

;